Dell Qlogic QME8242, Руководство пользователя

Страница: 52 / 178

2–Driver Installation and Configuration
VMware Driver Installation and Configuration
2-34 CU0354602-00 A
This section provides the following installation procedures for the CIM Provider:
 Initial Installation
 Subsequent Update Installation
Initial Installation
 To install the QLogic Adapter CIM Provider using the
esxupdate
command
(ESX systems only):
1. Copy the
offline-bundle.zip
file into the root directory (/) of the
ESX system.
2. Issue the
esxupdate
command as follows:
# cd /
# esxupdate --bundle offline-bundle.zip --nodeps
–nosigcheck --maintenancemode update
 To install the QLogic Adapter CIM Provider from a remote host using the
vSphere CLI
vihostupdate
command (ESXi systems only):
1. Copy the
offline-bundle.zip
file to any location on the host where
either the vSphere CLI package is installed or vSphere Management
Assistant (vMA) is hosted.
2. Navigate to the location of the
offline-bundle.zip
file.
3. Issue the
vihostupdate
command to install the offline bundle as follows:
# vihostupdate.pl <conn_options> --install --bundle
offline-bundle.zip --nosigcheck
4. Follow the on-screen instructions to complete the installation.
You may need to reboot the ESXi system.
NOTE:
To update the provider from a remote host using the
vihostupdate
command, make sure that the ESXi system is in Maintenance Mode.
To put the ESXi host in Maintenance Mode using the vSphere Client,
select
Inventory -> Host -> Enter Maintenance Mode .
NOTE:
For more details on
vihostupdate
, refer to the documents on the
VMware vSphere Command-Line Interface Documentation page,
located here:
http://www.vmware.com/support/developer/vcli/