Dell Qlogic QME8242, Руководство пользователя

Страница: 110 / 178

3–Adapter Management Applications
Windows Management Applications
3-50 CU0354602-00 A
To run user diagnostics in the GUI:
1. Access the Windows Control Panel, and then open the Device Manager.
2. In the Device Manager, right-click the QLogic 10 Gb Ethernet adapter, and
then on the shortcut menu, click
Properties .
3. On the adapter properties page, click the Diagnostics tab. Figure 3-17
shows the Diagnostics page.
Figure 3-17. Diagnostics Tests on Windows
4. Under Diagnostic Tests , select one or more check boxes indicating the
tests you want to run: Hardware Test , Register Test , Interrupt Test ,
Loopback Test , and Link Test . ( “Windows Diagnostic Test Descriptions” on
page 3-54 describes each test type.)
5. Click Run Tests .
NOTE:
Only one test can run at a time. Multiple tests can run sequentially.