Dell Qlogic QME8242, Руководство пользователя

Страница: 159 / 178

4–Boot Configuration
DHCP Boot Setup (iSCSI)
CU0354602-00 A 4-33
Configuring DHCP iSCSI Boot for IPv4
To configure the QLogic adapter to obtain all of its IP and iSCSI initiator and target
settings from the DHCP server:
1. Ensure that the latest BIOS and firmware are installed.
2. Reboot the server, and when the QLogic iSCSI BIOS screen appears, press
CTRL+Q to enter the adapter BIOS utility,
Fast! UTIL.
3. On the initial Select Host Adapter screen, select the adapter ports you want
to configure for SAN boot. This will be the same MAC addresses for which
you created reservations on the DHCP server.
4. Press ENTER.
If both ports are to be configured, perform the following steps for the first
port, complete its configuration, and then repeat the steps for the second
port.
5. On the Fast! UTIL Options screen, select Configuration Settings , and then
press ENTER.
6. On the Configuration Settings screen, select iSCSI Boot Settings , and then
press ENTER.
7. On the iSCSI Boot Settings screen, select Adapter Boot Mode , and then
press ENTER.
8. When presented with the various Boot Modes, select DHCP using
VendorID , and then press ENTER.
9. Select the DHCP Boot Settings , and then press ENTER.
10. On the DHCP Boot Settings screen, select Vendor ID , and then press
ENTER.
11. Enter the Vendor ID (class) that you defined earlier in the DHCP server
configuration steps, and then press ENTER. Note that the vendor ID name is
case-sensitive. For this example, use
QLOGIC_ISAN because it matches
what was configured previously.
12. Press ESC until the Configuration Settings Modified screen is displayed.
NOTE:
Although this section describes how to configure a Windows 2003 or
Windows 2008 DHCP server and QLogic adapter to allow DHCP to work,
additional steps are required. For example, you must also configure the IP
addresses of the Ethernet interfaces on the DHCP server, configure the
iSCSI storage box, and configure the network. These configuration steps are
outside the scope of this guide.