![background image](http://html1.mh-extra.com/html/national-instruments/68m-50f-step/68m-50f-step_user-manual_3392973001.webp)
ValueMotion
™
is a trademark of National Instruments Corporation. Product and company names mentioned herein are trademarks or trade names
of their respective companies.
322543A-01
©
Copyright 1999 National Instruments Corp. All rights reserved.
August 1999
USER GUIDE
68M-50F S
TEP
/S
ERVO
B
ULKHEAD
C
ABLE
A
DAPTER
Thank you for purchasing a 68M-50F step/servo bulkhead cable adapter.
Using the 68M-50F step/servo bulkhead cable adapter, you can connect a
68-pin motion controller to a 50-pin motion accessory, or you can connect
a 50-pin ValueMotion controller to a 68-pin motion accessory. You set
switches to configure the adapter for stepper or servo operation, as well as
to set each axis as either a trigger input or a breakpoint output.
Configuring Your Adapter
Make sure the power is off to the controller and the accessory before setting
the switches.
Figure 1 shows the location of the switches on the adapter.
Figure 1.
68M-50F Adapter Switch Locations
1
Step/Servo Switch Bank
2
Axis 1 Trigger/Breakpoint Switch
3
Axis 2 Trigger/Breakpoint Switch
4
Axis 3 Trigger/Breakpoint Switch
5
Axis 4 Trigger/Breakpoint Switch
2
1
3
4
5