WINS*
1
WINS Mode
Select the check box to get the WINS server address
automatically from the DHCP server.
WINS Primary Server
Sets WINS server address in the
nnn.nnn.nnn.nnn
format.
Each section of
nnn.nnn.nnn.nnn
is a value between 0 and
254. Note that values 127 and 224-254 are not valid for the
first three-digits.
WINS Secondary Server
Sets a back up WINS server address in the
nnn.nnn.nnn.nnn
format. Each section of
nnn.nnn.nnn.nnn
is a value between 0
and 254. Note that values 127 and 224-254 are not valid for
the first three-digits.
LPD
Connection Time-Out
Sets the connection timeout period from 1 to 1000 seconds.
IP Filter (IPv4)
To set the IP Filter settings, click
IP Filter
. The
IP Filter
page is displayed.
Port9100
Port
Number
Sets the port number from 9000 to 9999.
Connection Time-Out
Sets the connection timeout period between 1 and 1000
seconds.
IP Filter (IPv4)
To set the IP Filter settings, click
IP Filter
. The
IP Filter
page is displayed.
IPP *
1
Printer URI
Displays the printer URI.
Connection Time-Out
Sets the connection timeout period from 1 to 1000 seconds.
Port Number
Displays the port number for receiving requests from the
client.
Maximum Sessions
Displays the maximum number of connections received
simultaneously by the client.
WSD
Port Number
Sets the port number from 8000 to 9999.
Receive Time-Out
Sets the receive timeout period from 1 to 65535 seconds.
Notification Time-Out
Sets the notification timeout period from 1 to 60 seconds.
Maximum Number of TTL
Sets the maximum number of TTL from 1 to 10.
Maximum Number of
Notification
Sets the maximum number of notifications from 10 to 20.
HTTP
Port Number
Sets the port number to 80 or from 8000 to 9999.
Simultaneous Connections
Displays the maximum number of connections received
simultaneously by the client.
Connection Time-Out
Sets the connection timeout period from 1 to 255 seconds.
Содержание 3115CN
