Load XXX
NNN-NNN
YYY
yyy
Incorrect paper size is loaded in
the specified tray.
XXX
indicates the number of the
tray or multipurpose feeder.
YYY
indicates a paper size.
yyy
indicates paper quality.
Error
NNN-NNN
relates to
printer problems.
Load the specified paper in the specified trays.
See "
Loading Print Media in Standard and
Optional Trays
".
PDL Request
016-720
Data Violation
Press
Error relating to PDL emulation
problems occurs.
· Press
to clear the message, cancel the
current print job, and conduct the next print
job, if any.
· Press
Cancel
to cancel the print job.
Invalid Job
016-799
Data Violation
Press
When the configuration of the
multifunction printer on the
printer driver does not conform
to the multifunction printer you
are using, this message
appears.
· Press
Cancel
to cancel the print job.
· Press
to clear the message, cancel the
current print job, and conduct the next print
job, if any.
· Ensure that the printer configuration on the
printer driver conforms to the multifunction
printer you are using.
Over Heat
042-700
Cooling down
Please Wait...
Since it is abnormally hot inside
the multifunction printer,
printing is paused.
Wait for a while with the multifunction printer
on until the error disappears.
Memory Full
017-970
FaxJob Failure
Press
The fax memory is full and
cannot continue processing the
current fax job.
· Press
to clear the message.
· The fax memory is full and fax job is
terminated. Print the received images, or
wait for a while until sending images is
completed.
Memory Full
033-788
Fax Job Failure
Press
The fax memory is full and
cannot continue processing the
current fax job.
· Press
to clear the message.
· The fax memory is full. Remove the received
images, or wait for a while until sending
images is completed.
Accumulation Limit
Not Stored
For Last Sheet
Press
Exceeds the maximum sheets of
paper at a time when you send
a fax.
· Press
to clear the message.
· The maximum sheets of paper at a time are
loaded.
· Load up to 50 sheets of paper at a time.
No Answer
035-701
Fax Job Failure
Press
No answer is received from the
remote machine.
(T1 timeout on sending data)
· Press
to clear the message.
· No answer is received from the remote
machine. Check the status of the remote
machine.
Communication
035-702
Fax Job Failure
Press
The communication was shut by
the remote machine.
(Received DCN)
· Press
to clear the message.
· The communication was shut by the remote
machine. Check the status of the remote
machine.
Содержание 3115CN
