Dell 3115CN, Руководство пользователя

Страница: 125 / 634

NOTE: The recommended wireless protocol setup requires a USB cable to be present during setup.
Ensure that it is available before you start the wireless setup. To purchase a USB cable, visit
www.dell.com .
NOTE: Ensure that your computer is already connected to your wireless access point, and that you
have the wireless protocol information (SSID, Security Settings, and Password) about your wireless
access point before you start the wireless setup. If in doubt, contact your wireless access point
distributor.
If you are using Windows XP, Windows Server 2003 (after SP1), Windows Server 2008, or Windows Vista,
you will need to turn off Windows Firewall before you proceed with the installation. To disable or enable your
built-in operating system firewall:
Click Start Help and Support . 1.
In the Search box, type
firewall
and then click the green arrow. 2.
In the Pick a Task list, click Enable or disable Internet Connection Firewall and then follow the
instructions on the screen.
3.
NOTE: Dell recommends that you enable your built-in operating system firewall after you install the
printer software. Enabling the built-in operating system firewall after you install the printer software
does not limit the use of your network printer.
Insert the Drivers and Utilities CD into the computer. 1.
NOTE: If the CD does not automatically launch, click Start Run , type
D:\Setup.exe
(where D is
the drive letter of your CD), and then click OK .
NOTE: For Windows Vista, click Continue when the User Account Control dialog box appears.
Select Network Installation . 2.