Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 106 / 196

Removal and Replacement
5–8 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
5.7 Floppy Drive
Perform the following procedure to remove the floppy drive:
1. Extend the chassis for service (see Section 5.2).
2. Remove the front panel (see Section 5.3).
3. Remove the removable media bracket (see Section 5.6).
4. Remove the five screws
™ that secure the two halves of the removable media bracket
together (see Figure 5-6).
5. Disconnect the flex cable connector
š from the rear of the floppy drive (see Figure 5-6).
6. Remove the four screws
› that secure the floppy drive to the top half of the removable
media bracket (see Figure 5-6).
To replace the floppy drive, refer to Figure 5-6 and reverse steps 1 through 6 of the removal
procedure.
Figure 5-6 Removing and Replacing the Floppy Drive
EA-00082
3
3
1
1
2