Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 61 / 196

Operation
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 3–15
Table 3-4 SRM Environment Variables (Cont.)
Variable Attributes Description
tt_allow_login NV
Enables or disables login to the SRM console firmware on
alternative console ports.
0—Disables login on alternative console ports.
1—Enables login on alternative console ports (default setting).
If the console output device is set to serial, set
WWBDOORZBORJLQ
1 allows you to log in on the primary COM1(MMJ) port, or
alternate COM2 port, or the VGA monitor.
If the console output device is set to graphics, set
WWBDOORZBORJLQ 1 allows you to log in through either the
COM1(MMJ) or COM2 console port.
3.4.5 Setting SRM Console Security
You can set the SRM console to secure mode to prevent unauthorized personnel from
modifying the system parameters or otherwise tampering with the system from the console.
When the SRM is set to secure mode, you can use only two console commands:
•
The boot command, to boot the operating system
•
The continue command, to resume running the operating system if you have inadvertently
halted the system
The console security commands are as follows:
set password
set secure
These commands put the console into secure mode.
clear password
Exits secure mode.
login Turns off console security for the current session.
See the Compaq AlphaServer ES40 User Interface Guide for details on setting SRM console
security.