Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 31 / 196

Installation
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 2–11
2.6 Removing the Top Cover
____________________________ Caution __________________________
Use care when removing and replacing the cover to prevent damage to the RFI
gaskets that are located around the cover and opening.
______________________________________________________________
Perform the following procedure to remove the top cover:
1. Extend the chassis for service (see Section 5.2).
2. Loosen the three captive screws
™ on the top left side of the top cover š (see Figure 2-7).
3. Lift the left edge of the cover and slide it to the left until the three tabs
› on the right edge
of the top cover come out of the three slots
œ in the chassis wall and lift the top cover off
of the chassis.
To replace the top cover, refer to Figure 2-7 and reverse steps 1 through 3 of the removal
procedure.
Figure 2-7 Removing and Replacing the Top Cover
EA-00065
1
2
3
4