Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 33 / 196

Installation
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 2–13
2.8 Installing Optional CPU Modules
The ES40CSLP rackmount system can contain up to four CPU modules. Figure 2-9 shows the
CPU slot locations on the system motherboard. The following configuration rules apply to the
CPU modules:
•
The first CPU module must be in CPU slot 0. CPU slot 0 is designated as the primary
CPU.
•
Additional CPU modules should be installed in ascending order by slot number.
•
All CPU modules must have the same clock frequency.
Figure 2-9 CPU Slot Layout on the System Motherboard
EA-00067
MMB1 MMB3 MMB0 MMB2
J7 J8 J5 J6
CPU3 CPU2 CPU1 CPU0
J17 J18 J34 J40
1
2
3
4
1 2 3 4
™ CPU slot 0 › CPU slot 2
š CPU slot 1 œ CPU slot 3
Perform the following procedure to install an optional CPU module:
1. Perform an orderly shutdown of the operating system.
2. Ensure that the power On/Off button on the OCP is in the Off position.
3. Extend the chassis for service (see Section 5.2).
4. Disconnect the power cord from the power supply ac input receptacle on the rear of the
chassis.
5. Remove the top cover (see Section 2.6).
6. Locate the next available slot for installing a CPU module. CPU modules should be
installed in ascending order by slot number (see Figure 2-9 for CPU slot locations).