Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 192 / 196

Jumpers and Switches
C–2 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
The following are the settings for the FIR_FUNC jumpers (J20, J22, and J23).
Setting Meaning
000 Normal
001 Prevent flash loads. Load from SROM.
010 Load from floppy
111 Lock console. This setting prevents the writing of flash from CPUs.
Table C-2 lists the switches on the system motherboard switchpack E296 along with the switch
name and the default position. Figure C-1 shows the location of switchpack E296.
Table C-2 System Motherboard Switchpack E296 Settings
Switch Name Default Position
SW1 SYS_EXT_DELAY1 Off
SW2 SYS_EXT_DELAY0 On
SW3 SYS_FILL_DELAY Off
SW4 CPU_CFWD_PSET Off
SW5 PCI_CLK_DIV_IN1 Off
SW6 PCI_CLK_DIV_IN0 On
SW7 Y_DIV3 On
SW8 Y_DIV2 On
SW9 Y_DIV1 Off
SW10 Y_DIV0 Off
Table C-3 lists the switches on the system motherboard switchpack E16 along with the switch
name and the default position. This switchpack is used to set the system motherboard MAIN
CLOCK frequency. Figure C-1 shows the location of switchpack E16.
Table C-3 System Motherboard Switchpack E16 Settings
Switch Name Default Position
SW1 M0 On
SW2 M1 On
SW3 M2 On
SW4 M3 Off
SW5 M4 On
SW6 M5 Off
SW7 M6 On
SW8 N0 Off
SW9 N1 On
SW10 XTAL_SEL Off