Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 34 / 196

Installation
2–14 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
7. Put on an antistatic wriststrap.
_____________________________Caution__________________________
An antistatic wriststrap must be worn when handling any module to prevent
damage to the module.
______________________________________________________________
8. Hold the CPU module to be installed by the module levers at each end of the module and
align the CPU module with the chosen slot (see Figure 2-10).
9. Slide the CPU
™ module down into the slot until it stops.
10. Push down on the two module levers to lock the CPU module into the slot.
After installing the CPU module, reverse steps 1 through 5 and reboot the system. To verify the
installation, observe the screen display during power-up to see if the newly installed CPU
module appears in the display. Issue the show config command from the SRM console to
display the status of the new CPU module.
Figure 2-10 Installing Optional CPU Modules
EA-00068
1