Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 27 / 196

Installation
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 2–7
2.4.4 Attaching the Inner Races to the Chassis
To attach the inner slide races to the chassis, refer to Figure 2-3 and proceed as follows:
____________________________ Caution __________________________
When performing this procedure, ensure that the arrow
™ (shown in Figure 2-3)
points upward and the locking lever
š points toward the front of the system.
Otherwise, the slide will be damaged when the system is installed on the slide
assemblies.
______________________________________________________________
1. Attach the right inner slide race
› to the lower right side of the system chassis (as viewed
from the front) using four 8-32 pan-head screws
œ.
2. Attach the left inner slide race
 to the upper left side of the system chassis (as viewed
from the front) using four 8-32 pan-head screws
œ.
Figure 2-3 Attaching the Inner Slide Races
EA-00061
1
2
3
4
5
4