Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 49 / 196

Operation
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 3–3
›
The primary CPU (usually CPU0) initializes and tests the B-cache and memory, then
loads the flash SROM code to the next CPU. That CPU then initializes the EV6 (21264
chip) and marks itself as the secondary CPU. Once the primary CPU sees the secondary,
it loads the flash SROM code to the next CPU until all remaining CPUs are loaded.
œ
The Flash SROM performs various B-cache tests. For example, the ECC data test verifies
the detection logic for single- and double-bit errors.

The primary CPU initiates all memory tests. The memory is tested for address and data
errors for the first 32 MB of memory. It also initializes all of the “sized” memory in the
system.
If a memory failure occurs, an error is reported. An untested memory array is assigned to
address 0 and the failed memory array is de-assigned. The memory tests are re-run on the
first 32 MB of memory. If all memory fails, the “No Memory Available” message is
reported and the system halts.
ž
If all memory passes, the primary CPU loads the SRM console and transfers control to
it.
Table 3-1 SROM Power-Up Status Messages
Status
Code
Full SROM Message
Corresponding
OCP Message
DF SROM program starting Power on
DE Init and test PCI bus PCI Test
DD Bcache data tests in progress BC Data
DC Bcache address test in progress BC Addr
DB CPU parity and ECC error detection in progress Par/ECC
DA Bcache ECC data tests in progress BC ECC
D8 Bcache TAG lines tests in progress BC Tag
D7 Reloading SROM Reload
D5 Memory sizing in progress Size Mem
D4 Memory configuration in progress Cfg Mem
D3 Memory data test in progress Mem Data
D2 Memory address test in progress Mem Addr
D1 Memory pattern test in progress Mem Patt
D0 Memory thrashing test in progress Mem thra
CF Memory initialization Mem Init
CD Loading console Load ROM
CB Code execution complete (transfer control) Jump to Console.
C5 Loading program from floppy Load Flp
93 Starting secondary on CPU #3 RelCPU 3
92 Starting secondary on CPU #2 RelCPU 2
91 Starting secondary on CPU #1 RelCPU 1
90 Starting secondary on CPU #0 RelCPU 0