Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 78 / 196

Operation
3–32 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
3.10.5 Updating from an OpenVMS System Disk
You can update OpenVMS from a system disk.
1. Download the firmware update image from the Firmware Updates Web site.
2. Rename the downloaded file to fwupdate.exe.
3. Enter the following commands on the OpenVMS Alpha system:
$ set file/attr=(rfm:fix,lrl:512,mrs:512,rat:none) fwupdate.exe
$ copy/contiguous fwupdate.exe "system_disk":[sys0.sysexe]
______________________________ Note ___________________________
Insert the name of your system disk in place of "system_disk," for example,
dka100:.
______________________________________________________________
4. Shut down the operating system to get to the SRM console prompt.
5. Boot the update utility from the SRM console as follows:
P00>>> boot dka100 -flags 0,a0
______________________________ Note ___________________________
Replace dka100 with the name of the system disk, if different.
______________________________________________________________
6. After some messages are displayed, you will be prompted for the bootfile. Enter the
directory and file name as follows :
Bootfile: [sys0.sysexe]fwupdate.exe
7. Enter the update command at the UPD> prompt
.
3.10.6 OpenVMS and Tru64 UNIX Network Boots
You can update OpenVMS using the MOP network protocol and Tru64 UNIX with the BOOTP
protocol.
3.10.6.1 Updating OpenVMS Using the MOP Protocol
1. Download the firmware update image from the Firmware Updates Web site.
2. Copy the downloaded file to an OpenVMS based network server for MOP booting on the
AlphaServer system. For details on configuring the MOP server, refer to OpenVMS
documentation or the system's Firmware Release Notes document.
3. To ensure that the downloaded file is in a proper VMS fixed record format, enter the
following command before using the file for MOP booting:
$ set file/attr=(rfm:fix,lrl:512,mrs:512,rat:none) "fwupdate.sys"
______________________________ Note ___________________________
Replace "fwupdate.sys" with the name of the firmware image you downloaded.
______________________________________________________________
4.
Boot the update file. For example: