Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 105 / 196

Removal and Replacement
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 5–7
5.6 Removable Media Bracket
Perform the following procedure to remove the removable media bracket:
1. Extend the chassis for service (see Section 5.2).
2. Remove the front panel (see Section 5.3).
3. Remove the two screws
™ that secure the removable media bracket š to the front of the
chassis (see Figure 5-5).
4. Slide the removable media bracket out of the chassis until the main cable can be accessed.
5. Disconnect the main cable
› from the rear of the removable media bracket.
To replace the removable media bracket, refer to Figure 5-5 and reverse steps 1 through 5 of
the removal procedure.
Figure 5-5 Removing and Replacing the Removable Media Bracket
EA-00081
1
2
3