Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 36 / 196

Installation
2–16 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
_____________________________Caution__________________________
An antistatic wriststrap must be worn when handling any module to prevent
damage to the module.
______________________________________________________________
______________________________ Note ___________________________
Before installing the optional memory motherboards, refer to Section 2.10 and
install the memory DIMMs on the memory motherboards
______________________________________________________________
8. Hold the memory motherboard to be installed by the module levers
™ at each end of the
module and align the memory motherboard with the first MMB slot of the pair (see Figure
2-12).
9. Slide the memory motherboard
š down into the slot until it stops and then push down on
the two module levers to lock the memory motherboard into the MMB slot.
10. Repeat steps 8 and 9 to install the second memory motherboard in the second MMB slot of
the pair.
After installing the memory motherboard pair, reverse steps 1 through 5 and reboot the system.
To verify the installation, observe the screen display during power-up to see if the newly
installed memory motherboards appear in the display. Issue the show memory command from
the SRM console to display the status of the new memory motherboard pair.
Figure 2-12 Installing Optional Memory Motherboards
1
1
2
LJ-06651