Compaq ES40CSLP, Инструкция по установке, использованию и обслуживанию

Страница: 37 / 196

Installation
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 2–17
2.10 Installing Memory DIMMs
The ES40CSLP rackmount system contains four memory motherboards for installing memory
DIMMs. Each memory motherboard has eight slots for installing 200-pin DIMMs. A memory
set consists of four DIMMs. The system can be populated with a maximum of eight memory
sets, numbered 0 through 7. Figure 2-13 shows the memory motherboard slot locations on the
system motherboard and the memory set locations on the memory motherboards. The following
configuration rules apply to the memory sets:
•
DIMMs are installed in sets of four.
•
All DIMMs in a set must be the same size.
•
Two sets constitute an array. All DIMMs within an array must be the same size. For
example, if Set 0 consists of 64 MB DIMMs, Set 4 must also consist of 64 MB DIMMs.
The arrays are as follows:
Array 0 Set 0 and Set 4
Array 1 Set 1 and Set 5
Array 2 Set 2 and Set 6
Array 3 Set 3 and Set 7
•
DIMM sets must be installed in numerical order. Set 0 is installed first, then Set 1, Set 2,
Set 3, and so forth.
Figure 2-13 Memory Configuration
0
0
2
2
4
4
6
6
Array 0
Sets 0 & 4
Array 1
Sets 1 & 5
Array 2
Sets 2 & 6
Array 3
Sets 3 & 7
Sets
MMB 1
1
1
3
3
5
5
7
7
Array 0
Sets 0 & 4
Array 1
Sets 1 & 5
Array 2
Sets 2 & 6
Array 3
Sets 3 & 7
Sets
MMB 3
0
0
2
2
4
4
6
6
Array 0
Sets 0 & 4
Array 1
Sets 1 & 5
Array 2
Sets 2 & 6
Array 3
Sets 3 & 7
Sets
MMB 0
Array 0
Sets 0 & 4
Array 1
Sets 1 & 5
Array 2
Sets 2 & 6
Array 3
Sets 3 & 7
MMB 2
EA-00071
Perform the following procedure to install memory DIMMs:
1. Perform an orderly shutdown of the operating system.