Cisco Broadband Cable, Справочное руководство

Страница: 918 / 1278

5-58
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 5 Cisco CMTS Debugging Commands
debug cable privacy
debug cable privacy
To activate debugging of baseline privacy, use the debug cable privacy command in privileged EXEC
mode. To disable debugging output, use the no form of the command.
debug cable privacy
no debug cable privacy
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Usage Guidelines
This command activates debugging of the Baseline Privacy Interface (BPI) feature. When this command
is activated, the BPI handler generates a debugging message whenever the BPI state changes or a
BPI-related event occurs.
Tip
Debugging must be enabled for one or more cable interfaces, using the debug cable interface command,
before the debug cable privacy command displays any output. BPI debugging can be done only on a
per-interface basis, not on the basis of a CM’s MAC address.
Note This command is supported only on images that support BPI or BPI+ encryption.
Examples
The following is typical output from the debug cable privacy command:
02:32:08: CMTS Received AUTH REQ.
02:32:08: Created a new CM key for 0030.96f9.65d9.
02:32:08: CMTS generated AUTH_KEY.
02:32:08: Input : 70D158F106B0B75
02:32:08: Public Key:
02:32:08: 0x0000: 30 68 02 61 00 DA BA 93 3C E5 41 7C 20 2C D1 87
02:32:08: 0x0010: 3B 93 56 E1 35 7A FC 5E B7 E1 72 BA E6 A7 71 91
02:32:08: 0x0020: F4 68 CB 86 A8 18 FB A9 B4 DD 5F 21 B3 6A BE CE
02:32:08: 0x0030: 6A BE E1 32 A8 67 9A 34 E2 33 4A A4 0F 8C DB BD
02:32:08: 0x0040: D0 BB DE 54 39 05 B0 E0 F7 19 29 20 8C F9 3A 69
02:32:08: 0x0050: E4 51 C6 89 FB 8A 8E C6 01 22 02 34 C5 1F 87 F6
02:32:08: 0x0060: A3 1C 7E 67 9B 02 03 01 00 01
02:32:08: RSA public Key subject:
02:32:08: 0x0000: 30 7C 30 0D 06 09 2A 86 48 86 F7 0D 01 01 01 05
02:32:08: 0x0010: 00 03 6B 00 30 68 02 61 00 DA BA 93 3C E5 41 7C
02:32:08: 0x0020: 20 2C D1 87 3B 93 56 E1 35 7A FC 5E B7 E1 72 BA
02:32:08: 0x0030: E6 A7 71 91 F4 68 CB 86 A8 18 FB A9 B4 DD 5F 21
Release Modification
11.3 XA This command was introduced.