Cisco Broadband Cable, Справочное руководство

Страница: 710 / 1278

3-214
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show interface cable mac-scheduler
show interface cable mac-scheduler
To display the current time-slot scheduling state and statistics, use the show interface cable mac-
scheduler command in privileged EXEC mode.
show interface cable { slot/port | slot / subslot / port } mac-scheduler [ n ]
Note
In previous releases, information for the MAC scheduler was displayed using the show interface cable
and show interface cable upstream commands. In Cisco IOS Release 12.2 BC, the MAC scheduler
information is moved to this command.
Syntax Description
Defaults If no upstream port is identified, displays information for all upstreams on the specified cable interface.
Command Modes Privileged EXEC
Command History
slot/port Identifies the cable interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router,
slot can range from 3 to 6, and port can be 0
or 1, depending on the cable interface.
slot/subslot/port Identifies the cable interface on the Cisco uBR10012 router. The following
are the valid values:
• slot = 5 to 8
•
subslot = 0 or 1
• port = 0 to 4 (depending on the cable interface)
n (Optional) Displays information for the indicated upstream port. Valid
values start with 0 for the first upstream port on the cable interface line card.
Release Modification
12.1(4)CX This command was introduced. (Much of the information shown in this
command was previously shown by the
show interface cable and show
interface cable upstream commands.)
12.2(4)BC1 Support was added to the Cisco IOS Release 12.2 BC train.
12.2(15)CX Support was added for the Cisco uBR-MC28U/X cable interface line card,
including additional information about DOCSIS 2.0 A-TDMA and mixed
modulation profiles.
12.2(15)BC2 Additional information was added to the display for DOCSIS 2.0 A-TDMA
and mixed modulation profiles on the Cisco uBR-MC5X20S cable interface
line card.