Cisco Broadband Cable, Справочное руководство, Страница: 1176 / 1278

6-174
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
show tech-support
show tech-support
To display general information about the router when reporting a problem to Cisco technical support,
use the
show tech-support command in Privileged EXEC mode.
show tech-support [ page ] [ password ] [ ipmulticast | rsvp ]
Syntax Description
Defaults
Does not display passwords and does not page the output.
Command Modes
Privileged EXEC
Command History
Usage Guidelines The show tech-support command displays a large amount of configuration, run-time status, and other
information about the router for troubleshooting problems. The output of this command can be provided
to technical support representatives when reporting a problem.
The show tech-support command automatically displays the output of a number of different show
commands. The exact output depends on the platform, configuration, and type of protocols being used.
Typically, the output includes the output from the following commands, depending on platform:
Configuration Information
•
show version
• show runningconfig
page Pages the output of the command so that it is displayed one screen at a time
password Displays passwords in the configuration file
ipmulticast Displays the IP multicast related information by the show ip pim , show ip
igmp , show ip mroute , and other IP multicast show commands.
rsvp Displays the IP RSVP related information that is generated by the different
show ip rsvp commands.
Release Modification
12.0 T This command was introduced for the Cisco 1700 series router.
12.0 T This command was introduced for the Cisco 800 series router.
12.1(3a)XL This command was introduced for the Cisco uBR905 cable access router.
12.1(3)T Encryption module show commands added for the Cisco 1700 series
routers.
12.2(2)XA1 This command was introduced for the Cisco uBR925 cable access router.
12.2(4)YA This command was enhanced for the Cisco 806, Cisco 826, Cisco 827, and
Cisco 828 routers, the Cisco 1700 series routers, and the Cisco uBR905 and
Cisco uBR925 cable access routers by adding the output of Cisco Easy
VPN, IPSec, access list, and NAT/PAT
show commands.