Cisco Broadband Cable, Справочное руководство

Страница: 729 / 1278

3-233
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show interface cable service-flow
Table 3-58 shows the descriptions for the fields displayed by the phs option for this command:
Note The PHS packet counters are not supported on the Cisco uBR-MC5X20 card and always shows 0 or N/A,
depending on the software release.
Related Commands
Table 3-58 show interface cable service-flow phs Field Descriptions
Field Description
Sfid Service flow identification number.
Note
Primary service flow IDs are displayed even for offline
CMs because they are needed for modem re-registration.
PHSI PHS Index. Number that uniquely references the PHS rule.
PHSS PHS Size. 8-bit value specifying the number of header bytes to be
suppressed.
PHSV PHS Verify. Indicates whether PHS verification is enabled.
PHSM PHS Mask. 5-bit PHS mask that defines the header bytes that
should be suppressed.
PHSF PHS Field. 8-bit values that defines the header bytes that should be
suppressed.
cable service class Sets the parameters for DOCSIS 1.1 cable service class.
cable service flow
inactivity-threshold Sets the inactivity threshold value for service flows using Unsolicited Grant
Service with Activity Detection (UGS-AD).
cable service-flow
inactivity-timeout Sets the amount of time a dynamic service-flow can be present in the system
without any activity.
show cable qos
permission Displays the status of permissions for changing QoS tables.
show cable qos profile Displays the QoS profiles that have been defined.