Cisco Broadband Cable, Справочное руководство, Страница: 750 / 1278

3-254
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show packetcable gate
Tip
For complete information about the State field, see section 5.4, Gate Control Protocol Operation, in the
PacketCable Dynamic Quality-of-Service Specification (PKT-SP-DQOS-I03-020116).
Related Commands
State Describes the current state of the gate in both the upstream and downstream
directions. The possible state values are:
•
ALLOC = The CMTS has received a Gate-Alloc command from the gate
controller and has created the gate in response. The CMTS must now
wait for the request to be authorized.
•
AUTH = The CMTS has received a Gate-Set command from the gate
controller that authorizes the resources needed for the gate request. The
CMTS must now wait for the actual resources to be reserved.
• RSVD = All required resources for the gate have been reserved.
•
COMMIT = All resources have been committed at both the local CMTS
and remote CMTS. The local CMTS has also received a commit
notification from the local MTA and has finished all gate coordination
with the remote end. The gate can now pass traffic.
• INVLD = The gate is invalid, typically because of an error condition or
lack of resources. The CMTS will eventually delete the gate.
•
UNKWN = The gate is an unknown state.
SFID (us) SFID for the upstream associated with this PacketCable gate.
SFID (ds) SFID for the downstream associated with this PacketCable gate.
Total number of gates Displays the total number of gates that are currently allocated, authorized,
reserved, or committed.
Total Gates committed Displays the total number of gates that the CMTS has committed since the
CMTS was last reset or since the counters were last cleared.
Table 3-63 show packetcable gate Field Display (continued)
Field Description
Command Description
clear packetcable gate
counter commit Resets the counters that track the total number of committed gates.
packetcable Enables PacketCable operations on the Cisco CMTS.
show packetcable gate
counter commit Displays the total number of committed gates since system reset or since the
counter was last cleared.
show packetcable
global Displays the current PacketCable configuration.