2-407
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
hccp authentication
hccp authentication
To specify the authentication algorithm on a Working CMTS, Protect CMTS, or both use the
hccp
authentication
command in cable interface configuration mode. To disable authentication on a Working
CMTS or Protect CMTS, use the
no
form of this command.
hccp
group
authentication
{
md5
|
text
}
no hccp
group
authentication
{
md5
|
text
}
Syntax Description
Defaults
The default authentication algorithm is MD5.
Command Modes
Interface configuration (cable interface only)
Command History
Usage Guidelines
Use this command together with the
hccp authentication key-chain
command to enable and specify the
type of 1+1 redundancy authentication you will use in your protection scheme.
Examples
The following example shows how to specify MD5 as the authentication algorithm for group 1:
router(config-if)#
hccp 1 authentication md5
group
The group number for the specified interface. Valid values are any number
from 1 to 255, inclusive.
md5
Authentication algorithm. In Cisco IOS Release 12.1(3a)EC, MD5 is the
only authentication algorithm supported.
text
Unencrypted text specification. Rather than automatically encrypting the
authentication key-chain when using the MD5 authentication algorithm,
Cisco IOS software simply passes the authentication key-chain as standard,
unencrypted text.
Release
Modification
12.1(3a)EC
This command was introduced for the Cisco uBR7200 series routers.
12.1(7)EC1
Support was added for the Cisco uBR-MC16S cable interface line card.
12.2(4)XF1,
12.2(4)BC1
Support was added for the N+1 (1:n) RF Switch with the Cisco uBR10012
router and Cisco uBR-LCP-MC28C card.
12.2(8)BC2
Support was added for the N+1 (1:n) RF Switch with the Cisco uBR10012
router and Cisco uBR-LCP-MC16C, Cisco uBR-LCP-MC16E, and
Cisco uBR-LCP-MC16S cards.
12.2(11)BC1
Support was added for the N+1 (1:n) RF Switch with the
Cisco uBR7246VXR router and Cisco uBR-MC16C, Cisco uBR-MC16S,
and Cisco uBR-MC28C cards.
Содержание Broadband Cable
Страница 760: ...3 264 Cisco Broadband Cable Command Reference Guide OL 1581 08 Chapter 3 Cisco CMTS Show Commands show version ...
Страница 1216: ...6 214 Cisco Broadband Cable Command Reference Guide OL 1581 07 Chapter 6 Cable CPE Commands debug usb ...
Страница 1266: ...A 50 Cisco Broadband Cable Command Reference Guide OL 1581 07 Appendix A Using the ROM Monitor unset ...