Cisco Broadband Cable, Справочное руководство

Страница: 1181 / 1278

6-179
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
show voice port
Tip
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
exec prompt timestamp command in line configuration mode.
Related Commands
Signal Type Type of signalling for a voice port: loop-start, ground-start,
wink-start, immediate, and delay-dial.
Ring Frequency Configured ring frequency for this interface.
Hook Status Hook status of the FXO/FXS interface.
Ring Active Status Ring active indication.
Ring Ground Status Ring ground indication.
Tip Ground Status Tip ground indication.
Digit Duration Timing DTMF digit duration in milliseconds.
InterDigit Duration Timing DTMF interdigit duration in milliseconds.
InterDigit Pulse Duration
Timing Pulse dialing interdigit timing in milliseconds.
Alias User-supplied alias for this voice port, if any.
Coder Type Voice compression mode used.
Hook Flash Duration Timing Maximum length of hook flash signal.
Ring Cadence Configured ring cadence for this interface.
Table 6-34 show voice port Field Descriptions (continued)
Field Description
Command Description
show call active voice Displays the contents of the active call table.
show call history voice Displays the contents of the call history table.
show dial-peer voice Displays configuration information and call statistics for dial peers.