manualshive.com logo in svg

Cisco Broadband Cable, Справочное руководство, Страница: 414 / 1278

Поделиться
Скачать
Cisco Broadband Cable Скачать руководство пользователя страница 414

 

2-402

Cisco Broadband Cable Command Reference Guide

OL-1581-08

Chapter 2      Cisco CMTS Configuration Commands

enforced qos-profile

enforced qos-profile

To specify a quality of service (QoS) profile that should be enforced when users violate their registered 
QoS profiles, use the 

enforced qos-profile 

command in enforce-rule configuration mode. To delete the 

enforced QoS profile from the enforce-rule, use the 

no

 form of this command.

enforced qos-profile

 

profile-id

 [

no-persistence

] 

no enforced qos-profile

 

profile-id

 [

no-persistence

] 

Syntax Description

Defaults

The profile-id defaults to 0, and enforced QoS profiles are persistent across cable modem reboots. 

Command Modes

Enforce-rule configuration 

Command History

Usage Guidelines

An enforce-rule can specify an enforced QoS profile, which is automatically applied to subscribers that 
transmit more traffic than what is allowed by their registered QoS profile. The enforced QoS profile 
remains in effect during the penalty time period (see the 

penalty-period

 command). At the end of the 

penalty period, the subscriber returns to their registered QoS profile. 

If a cable modem reboots while it is in its penalty time period, it continues using the enforced QoS 
profile, unless the service provider has manually changed the modem’s registered QoS profile using the 

cable modem qos profile

 command. 

When you change the enforced QoS profile for a currently active enforce-rule, any cable modems using 
this rule that are currently in the penalty period continue using the previously configured enforced QoS 
profile. Any cable modems that enter the penalty period after this configuration change, however, use 
the new enforced QoS profile. 

profile-id

 

Specifies the QoS profile to be enforced. The valid range is 0 to 16383, 
with a default of 0. 

Note

Both the originally provisioned QoS profile and the enforced 
QoS profile must be created on the Cisco CMTS. This option 
does not support profiles that are created by the CM. 

no-persistence

 

(Optional) Specifies that the enforced QoS profile should not remain 
in force when a cable modem reboots. Instead, when a cable modem 
that is in the penalty period reboots, it is automatically removed from 
the penalty period and assigned the QoS profile that is specified in its 
DOCSIS configuration file. 

The default is without this option, so that enforced QoS profiles remain 
in force for cable modems across reboots. 

Release

Modification

12.2(15)BC1 

This command was introduced. 

Содержание Broadband Cable































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов