Cisco Broadband Cable, Справочное руководство

Страница: 1166 / 1278

6-164
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
show dhcp
Tip
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
exec prompt timestamp command in line configuration mode.
Related Commands
Requests Number of requests for an IP address to the server.
Acks Number of acknowledge messages sent by the server to the proxy client.
Naks Number of not acknowledge messages sent by the server to the proxy client.
Declines Number of offers from the server that have been declined by the proxy
client.
Releases Number of times IP addresses have been relinquished gracefully by the
client.
Bad Number of bad packets received due to wrong length, wrong field type, or
other causes.
TFTP Server Name Name (if any) configured for the server providing TFTP downloads to the
CM.
TIME0 IP address of the primary Time-of-Day (ToD) server.
TIME1 IP address of the secondary ToD server.
Subnet Subnet containing the DHCP server.
Table 6-29 show dhcp server Field Descriptions (continued)
Field Description
Command Description
cable-modem voip best-effort Allows voice calls to be sent upstream over the cable interface using
best effort.
show bridge cable-modem Displays bridging information for the cable interface.
show interfaces cable-modem Displays information about the cable interface.