6-28
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
crypto ipsec client ezvpn xauth
crypto ipsec client ezvpn xauth
To respond to a pending VPN authorization request, use the
crypto ipsec client ezvpn xauth
command
in privileged EXEC mode.
crypto ipsec client ezvpn xauth
name
Syntax Description
Defaults
No default behavior or values
Command Modes
Privileged EXEC
Command History
Usage Guidelines
If the tunnel name is not specified, the authorization request is made on the active tunnel. If there is more
than one active tunnel, the command fails with an error requesting that you specify the tunnel name.
When making a VPN connection, individual users might also be required to provide authorization
information, such as a username or password. When the remote end requires this information, the router
displays a message on the router’s console instructing the user to enter the
crypto ipsec client ezvpn
xauth
command. The user then uses the CLI to give this command and reply to the following prompts
to provide the required information.
Note
If the user does not respond to the Authentication notification, the message is repeated every ten seconds.
Examples
The following example shows the user being prompted to enter the
crypto ipsec client ezvpn xauth
command. The user then enters the requested information and continues.
Router#
20:27:39: EZVPN: Pending XAuth Request, Please enter the following command:
20:27:39: EZVPN: crypto ipsec client ezvpn xauth
Router#
crypto ipsec client ezvpn xauth
Enter Username and Password: userid
Password: ************
Router#
name
Identifies the IPSec VPN tunnel with a unique, arbitrary name.
Release
Modification
12.2(4)YA
This command was introduced on Cisco 806, Cisco 826, Cisco 827, and
Cisco 828 routers; Cisco 1700 series routers; and Cisco uBR905 and
Cisco uBR925 cable access routers.
12.2(8)YJ, 12.2(15)T
The
name
option was added as a required argument to specify a specific
IPSec VPN tunnel.
Содержание Broadband Cable
Страница 760: ...3 264 Cisco Broadband Cable Command Reference Guide OL 1581 08 Chapter 3 Cisco CMTS Show Commands show version ...
Страница 1216: ...6 214 Cisco Broadband Cable Command Reference Guide OL 1581 07 Chapter 6 Cable CPE Commands debug usb ...
Страница 1266: ...A 50 Cisco Broadband Cable Command Reference Guide OL 1581 07 Appendix A Using the ROM Monitor unset ...