Cisco Broadband Cable, Справочное руководство, Страница: 730 / 1278

3-234
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show interface cable sid
show interface cable sid
To display the service identifier (SID) information for a CM, use the show interface cable sid command
in privileged EXEC mode.
show interface cable { slot/port | slot / subslot / port } sid [ association | counters | qos | secondary-ip ]
[ verbose ]
Syntax Description
Command Modes
Privileged EXEC
Command History
slot/port Identifies the cable interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0 . On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0 or
1, depending on the cable interface.
slot/subslot/port Identifies the cable interface on the Cisco uBR10012 router. The following
are the valid values:
•
slot = 5 to 8
• subslot = 0 or 1
•
port = 0 to 4 (depending on the cable interface)
association Displays the virtual interfaces (VRF) or Interface Descriptor Blocks (IDBs).
connectivity Displays the values of the per-SID connectivity statistics. (This option
appears only in DOCSIS 1.0 and 1.0+ releases. Use the
show cable modem
connectivity command in DOCSIS 1.1 releases.)
counters Displays the values of the per-SID usage counters. Same as the keyword stats
that appeared in Cisco IOS Release 11.3(5)NA and earlier releases.
qos Displays the QoS characteristics received by each SID.
secondary-ip Displays the secondary IP addresses associated with each SID.
verbose Displays detailed information for the counters and qos options.
Note
The verbose option is supported by itself or with any of the other
options, but it displays additional information only for the counters
and qos options.
Release Modification
11.3 XA This command was introduced.
11.3(6)NA The keyword stats was changed to counters .
12.0(4)XI The primary SID information was added.
12.0(5)T The command output was modified to identify secondary SIDs.
12.0(7)XR and 12.0(7)T The verbose keyword was added to display additional information for the
counters option.