Cisco Broadband Cable, Справочное руководство

Страница: 1248 / 1278

A-32
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Appendix A Using the ROM Monitor
meminfo
meminfo
To display information about the available range of main memory and Flash memory, use the meminfo
command in ROM monitor mode.
meminfo
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes ROM monitor
Command History
Usage Guidelines The meminfo command displays the size of available main memory, its starting address, the size of
available packet memory, and the size of nonvolatile Flash memory.
Examples The following example shows how to display information about the current memory usage:
rommon 9 > meminfo
Main memory size: 512 MB.
Available main memory starts at 0xa000e000, size 0x7ffc8 KB
NVRAM size: 0x80000
rommon 10 >
Related Commands
Release Modification
11.3 NA This command was introduced on Cisco uBR7200 series routers.
12.1(5)EC Support was added for Cisco uBR7100 series routers.
12.2(4)BC1 Support was added for the Cisco uBR10012 router. Changes were also made
to the boot procedure after breaking into ROMMON to ensure that all
hardware and software registers are in a known state before loading the new
image.
Command Description
boot Boots the router manually.
sysreset Displays the return information from the system image that was last booted.