Cisco Broadband Cable, Справочное руководство

Страница: 1136 / 1278

6-134
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
show controllers cable-modem service-flows
Tip
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
exec prompt timestamp command in line configuration mode.
Related Commands
Table 18 Request/Transmission Policy Values
Drop if
Not Fit
In UGS
Size
Do Not Use...
PHS Frag Concat
Piggyback
Requests Req/Data
for Data
Req/Data
for
Requests Priority
Multicast
Requests
Broadcast
Requests
Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Best-Effort X X X X X X X X X
Non-Real Time Polling X X X X X X X 0 or 1 0 or 1
Real-Time Polling X X X X 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1
Unsolicited Grant
Service X X X X 1 1 1 1 1
Unsolicited Grant
Service with Activity
Detection X X X X 1 1 1 1 1
Command Description
show controllers cable-modem Displays high-level controller information about the cable interface.
show controllers cable-modem
bpkm Displays information about the baseline privacy key management
exchange between the cable interface and the CMTS.
show controllers cable-modem
crypto des Displays information about the Data Encryption Standard (DES)
engine registers.
show controllers cable-modem
filters .Displays the registers in the MAC hardware that are used for
filtering received frames.
show controllers cable-modem
mac Displays detailed MAC-layer information for the cable interface.
show controllers cable-modem
phy Displays the contents of the registers used in the downstream
physical hardware of the cable interface.
show controllers cable-modem
tuner Displays the settings for the upstream and downstream tuners used
by the cable interface.