Cisco Broadband Cable, Справочное руководство

Страница: 273 / 1278

2-261
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
cable telco-return spd dial-timer
cable telco-return
registration-ip Selects a different IP address for the telco-return CM to send its
registration requests.
cable telco-return spd dhcp-
authenticate Indicates that telco-return CMs must use a specific DHCP server.
cable telco-return spd dhcp-
server Identifies the IP address of the DHCP server that the telco-return CMs
must use.
cable telco-return spd
factory-default Indicates the SPD that the telco-return CM uses during the
initialization process.
cable telco-return spd
manual-dial Enables the telco-return CM to operate in manual-dial mode.
cable telco-return spd
password Sets the password that the telco-return CM uses for authentication
when establishing a PPP connection.
cable telco-return spd
phonenum Sets the telephone numbers that the telco-return CM dials when
connecting to the headend’s network access server.
cable telco-return spd ppp-
authenticate Selects the authentication procedure to use when the telco-return CM
is establishing a PPP connection.
cable telco-return spd
radius-realm Selects a RADIUS server domain to use for the login response string.
cable telco-return spd
service-provider Includes the service provider name in the SPD.
cable telco-return spd
threshold Sets the number of failed dial-up connections that can occur before the
CM indicates a connection failure.
cable telco-return spd
username Sets the username that the telco-return CM uses for authentication
when establishing a PPP connection.