Cisco Broadband Cable, Справочное руководство

Страница: 805 / 1278

4-45
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 4 Commands for the Cisco uBR10012 Router
show cr10k-rp
show cr10k-rp
To display packet processing information for a particular service ID (SID) on a cable interface, use the
show cr10k-rp command in user EXEC or privileged EXEC mode.
show cr10k-rp cable x/y/z sid { classifier | mac-rw-index | queue | service-flow ds |
service-flow us }
Syntax Description
Defaults No default behavior or values.
Command Modes User EXEC, Privileged EXEC
Command History
Usage Guidelines
The show cr10k-rp command displays information that the PRE remote processor (RP) module has
about a particular SID. This information includes configuration information about the SID, as well as
internal status information that is useful only to Cisco engineers in troubleshooting problems.
Examples
The following example shows typical output for the show cr10k-rp classifier command for a SID that
identifies a cable modem:
Router# show cr10k-rp c6/1/0 2 classifier
Mac Rw Index: 5CCB Index: 7
CM Classifiers:
id=4, sfid=14 CFR Index 16396 RP sfindex 16396,
prio=10, sip=0.0.0.0, sip mask=0.0.0.0
dip=0.0.0.0, dip mask=0.0.0.0, prot=17, tos=A0,E0
sport = 0,750, dport = 1024,10000 matches = 0
id=2, sfid=13 CFR Index 16395 RP sfindex 16395,
cable x/y/z Identifies the cable interface for which information should be displayed.
sid Identifies the service ID (SID) for which information should be displayed.
The valid range is 1 to 8191.
classifier Displays classifier information for the SID.
mac-rw-index Displays the MAC-layer read/write index for the SID.
queue Displays information about the versatile traffic management system
(VTMS) packet queues for the SID.
service-flow ds Displays the mapping of the downstream service-flow IDs (SFIDs) being
used on the processor card and cable interface line card for the SID.
service-flow us Displays the mapping of the upstream service-flow ID (SFID) and service
ID (SID) for the SID.
Release Modification
12.2(15)BC1 This command was introduced for the Cisco uBR10012 router.