Administration: File Management
File Operations
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
86
6
•
Copy Method
—Select
USB
or
Internal Flash
.
•
File Name
—Enter name of destination backup file.
•
Sensitive Data Handling
—Select how sensitive data should be included in
the backup file. The following options are available:
-
Exclude
—Do not include sensitive data in the backup.
-
Encrypt
—Include sensitive data in the backup in its encrypted form.
-
Plaintext
—Include sensitive data in the backup in its plaintext form.
NOTE
The available sensitive data options are determined by the current
user SSD rules. For details, refer to the
STEP 3
Click
Apply
to begin the operation.
To backup a system configuration file using TFTP:
STEP 1
Click
Administration
>
File Management
>
File Operations
.
STEP 2
Enter the following fields:
•
Operation Type
—Select
Backup
.
•
Source File Type
—Select the type of file to be backed up.
•
Copy Method
—Select
TFTP
.
•
Server Definition
—Select whether to specify the TFTP server by IP
address or by domain name.
If Server Definition is
By Address
:
-
IP Version
—Select whether an IPv4 or an IPv6 address is used.
-
If the server is selected by name in the Server Definition, there is no need
to select the IP Version related options.
-
IPv6 Address Type
—Select the IPv6 address type (if used). The options
are:
Link Local
—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of
FE80
, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
