Access Control
ACL Binding
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
551
25
•
Default Action
—Select one of the following options:
-
Deny Any
—If packet does not match an ACL, it is denied (dropped).
-
Permit Any
—If packet does not match an ACL, it is permitted
(forwarded).
NOTE
Default Action can be defined only if IP Source Guard is not activated
on the interface.
STEP 4
Click
Apply
. The ACL binding is modified, and the Running Configuration file is
updated.
NOTE
If no ACL is selected, the ACL(s) that is previously bound to the VLAN are unbound.
ACL Binding (Port)
To bind an ACL to a port or LAG:
STEP 1
Click
Access Control
>
ACL Binding (Port)
.
STEP 2
Select an interface type
Ports/LAGs
(Port or LAG).
STEP 3
Click
Go
. For each type of interface selected, all interfaces of that type are
displayed with a list of their current ACLs:
•
Interface
—Identifier of interface on which ACL is defined.
•
MAC ACL
—ACLs of type MAC that are bound to the interface (if any).
•
IPv4 ACL
—ACLs of type IPv4 that are bound to the interface (if any).
•
IPv6 ACL
—ACLs of type IPv6 that are bound to the interface (if any).
•
Default Action
—Action of the ACL’s rules (drop any/permit any).
NOTE
To unbind all ACLs from an interface, select the interface, and click
Clear
.
STEP 4
Select an interface, and click
Edit
.
STEP 5
Select one of the following:
•
Select MAC-Based ACL
—Select a MAC-based ACL to be bound to the
interface.
