Cisco 350XG series, Руководство администратора

Страница: 71 / 625

Administration
File Management
Cisco 350XG & 550XG Series 10G Stackable Managed Switches 67
5
- Global —The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
• Link Local Interface —Select the link local interface (if IPv6 Address Type
Link Local is selected) from the list.
• Log Server IP Address/Name— Enter the IP address or domain name of the
log server.
• UDP Port —Enter the UDP port to which the log messages are sent.
• Facility —Select a facility value from which system logs are sent to the
remote server. Only one facility value can be assigned to a server. If a second
facility code is assigned, the first facility value is overridden.
• Description —Enter a server description.
• Minimum Severity —Select the minimum level of system log messages to
be sent to the server.
STEP 5
Click Apply. The Add Remote Log Server page closes, the SYSLOG server is
added, and the Running Configuration file is updated.
File Management
See Administration: File Management .
Reboot
Some configuration changes, such as enabling jumbo frame support, require the
system to be rebooted before they take effect. However, rebooting the device
deletes the Running Configuration, so it is critical that the Running Configuration is
saved to the Startup Configuration before the device is rebooted. Clicking
Apply
does not save the configuration to the Startup Configuration. For more information
on files and file types, see the
System Files section.
You can back up the device configuration by using the File Operations page or
clicking Save at the top of the window. You can also upload the configuration from
a remote device in the same page.