IP Configuration: RIPv2
Configuring RIP
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
376
17
•
Distribute-list In
—Select to configure filtering on RIP incoming routes for
the specified IP address(es) in the Access List Name. If this field is enabled,
select the Access List Name below:
•
Access List Name
—Select the Access List name (which includes a list of IP
addresses)) of RIP incoming routes filtering for a specified IP interface. See
for a description of access lists.
•
Distribute-list Out
—Select to configure filtering on RIP outgoing routes for
the specified IP address(es) in the Access List Name. If this field is enabled,
select the Access List Name below:
•
Access List Name
—Select the Access List name (which includes a list of IP
addresses)) of RIP outgoing routes filtering for a specified IP interface. See
for a description of access lists.
STEP 3
Click
Apply
. The settings are written to the Running Configuration file.
Displaying RIPv2 Statistic Counters
To view the RIP statistical counters for each IP address:
STEP 1
Click
IP Configuration
>
RIPv2 > RIPv2 Statistics
.
The following fields are displayed:
•
IP Interface
—IP interface defined on the Layer 2 interface.
•
Bad Packets Received
—Specifies the number of bad packets identified by
RIP on the IP interface.
•
Bad Routes Received
—Specifies the number of bad routes received and
identified by RIP on the IP interface. Bad routes mean that the route
parameters are incorrect. For example, the IP destination is a Broadcast
address, or the metric is 0 or greater than 16
•
Update Sent
—Specifies the number of packets sent by RIP on the IP
interface.
STEP 2
To clear all interface counters, click
Clear All Interface Counters
.
