Status and Statistics
Port and VLAN Mirroring
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
43
4
-
Redundant
—Provides the status of the redundant power supply.
Displays one of the following:
Active—Redundant Power Supply (RPS) supply is being used.
Available—RPS is connected but is not being used.
Not Available—RPS is connected but is already providing power to
other devices.
Not Connected—The RPS is not connected.
Present—The RPS is connected.
Port and VLAN Mirroring
Port mirroring is used on a network device to send a copy of network packets
seen on a single device port, multiple device ports, or an entire VLAN to a network
monitoring connection on another port on the device. This is commonly used for
network appliances that require monitoring of network traffic, such as an intrusion-
detection system. A network analyzer connected to the monitoring port processes
the data packets for diagnosing, debugging, and performance monitoring.
Up to eight sources can be mirrored. This can be any combination of eight
individual ports and/or VLANs.
A packet that is received on a network port assigned to a VLAN that is subject to
mirroring is mirrored to the analyzer port even if the packet was eventually
trapped or discarded. Packets sent by the device are mirrored when Transmit (Tx)
mirroring is activated.
Mirroring does not guarantee that all traffic from the source port(s) is received on
the analyzer (destination) port. If more data is sent to the analyzer port than it can
support, some data might be lost.
VLAN mirroring is not active on a VLAN that was not manually created. For
example, if VLAN 23 was created by GVRP, and you manually created VLAN 34,
and you create port mirroring that includes VLAN 23, VLAN 34, or both, and later
on delete VLAN 34, the status in port mirroring is set to
Not Ready
, because the
VLAN34 is no longer in the database and VLAN23 was not created manually.
