Administration: Stack Management
Stack Ports
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
113
7
•
When attempting to connect a unit to a stack whose topology is not a ring/
chain (for example, trying to connect a unit to more than two neighboring
units - star topology), only two stack LAGs can be active, the remainder of
the stack ports are set to standby mode (inactive).
Default Stack and Network Ports
All ports are configured as network ports by default.
Auto Selection of Port Speed
The stacking cable type is discovered automatically when the cable is connected
to the port (auto-discovery is the default setting). The system automatically
identifies the stack cable type and selects the highest speed supported by the
cable and the port.
A SYSLOG message (informational level) is displayed when the cable type is not
recognized.
