3
Cisco 350XG & 550XG Series 10G Stackable Managed Switches, Firmware Release 1.0.0.x
27
Configuration Wizards
This section describes the following configuration wizards:
It covers the following topics:
•
•
Getting Started Wizard
This wizard assists in the initial configuration of the device.
STEP 1
Click
Configuration Wizards
>
Getting Started Wizard
.
STEP 2
Click
Launch Wizard
and
Next
.
STEP 3
Enter the fields:
•
System Location
—Enter the physical location of the device.
•
System Contact
—Enter the name of a contact person.
•
Host Name
—Select the host name of this device. This is used in the prompt
of CLI commands:
-
Use Default
—The default hostname (System Name) of these switches is:
switch123456
, where 123456 represents the last three bytes of the
device MAC address in hex format.
-
User Defined
—Enter the hostname. Use only letters, digits, and hyphens.
Host names cannot begin or end with a hyphen. No other symbols,
punctuation characters, or blank spaces are permitted (as specified in
RFC1033, 1034, 1035).
STEP 4
Click
Next
.
