manualshive.com logo in svg

Cisco 350XG series, Руководство администратора

Поделиться
Скачать
Cisco 350XG series Скачать руководство пользователя страница 496

Security: Secure Sensitive Data Management

Configuration Files

Cisco 350XG & 550XG Series 10G Stackable Managed Switches

477

21

 

•

If there is no file SSD indicator in a mirror or backup configuration file, all 
users are allowed to access the file. 

•

A user with Both read permission can access all mirror and backup 
configuration files. However, if the current read mode of the session is 
different than the file SSD indicator, the user is presented with a prompt 
indicating that this action is not allowed.

•

A user with Plaintext Only permission can access mirror and backup 
configuration files if their file SSD Indicator shows Exclude or Plaintext Only 
sensitive data. 

•

A user with Encrypted Only permission can access mirror and backup 
configuration files with their file SSD Indicator showing Exclude or 
Encrypted sensitive data. 

•

A user with Exclude permission cannot access mirror and backup 
configuration files with their file SSD indicator showing either encrypted or 
plaintext sensitive data. 

The user should not manually change the file SSD indicator that conflicts with the 
sensitive data, if any, in the file. Otherwise, plaintext sensitive data may be 
unexpectedly exposed. 

Sensitive Data Zero-Touch Auto Configuration 

SSD Zero-touch Auto Configuration is the auto configuration of target devices with 
encrypted sensitive data, without the need to manually pre-configure the target 
devices with the passphrase whose key is used to encrypted the sensitive data. 

The device currently supports Auto Configuration, which is enabled by default. 
When Auto Configuration is enabled on a device and the device receives DHCP 
options that specify a file server and a boot file, the device downloads the boot 
file (remote configuration file) into the Startup Configuration file from a file server, 
and then reboots.

NOTE

The file server may be specified by the bootp siaddr and sname fields, as well as 
DHCP option 150 and statically configured on the device. 

The user can safely auto configure target devices with encrypted sensitive data, 
by first creating the configuration file that is to be used in the auto configuration 
from a device that contains the configurations. The device must be configured and 
instructed to: 

•

Encrypt the sensitive data in the file 

Содержание 350XG series


















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды