IP Configuration
Domain Name System
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
366
16
STEP 4
Enter the parameters.
•
IP Version
—Select
Version 6
for IPv6 or
Version 4
for IPv4.
•
IPv6 Address Type
—Select the IPv6 address type (if IPv6 is used). The
options are:
-
Link Local
—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of
FE80
, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
-
Global
—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
•
Link Local Interface
—If the IPv6 address type is Link Local, select the
interface through which it is received.
•
Host Name
—Enter a user-defined host name or fully-qualified name. Host
names are restricted to the ASCII letters A through Z (case-insensitive), the
digits 0 through 9, the underscore and the hyphen. A period (.) is used to
separate labels.
•
IP Address
—Enter a single address or up to eight associated IP addresses
(IPv4 or IPv6).
STEP 5
Click
Apply
. The settings are saved to the Running Configuration file.
