Quality of Service
QoS Advanced Mode
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
581
26
STEP 4
Enter the parameters.
•
Policy Name
—Displays the policy to which the class map is being added.
•
Class Map Name
—Select an existing class map to be associated with the
policy. Class maps are created in the Class Mapping page.
•
Action Type
—Select the action regarding the ingress CoS/802.1p and/or
DSCP value of all the matching packets.
-
Always use default trust mode
—Ignore the ingress CoS/802.1p and/or
DSCP value. The matching packets are sent as best effort.
-
Always Trust
—If this option is selected, the device trusts the CoS/802.1p
and DSCP of the matching packet. If a packet is an IP packet, the device
puts the packet in the egress queue based on its DSCP value and the
DSCP to Queue Table. Otherwise, the egress queue of the packet is
based on the packet's CoS/802.1p value and the CoS/802.1p to Queue
Table.
-
Set
—If this option is selected, use the value entered in the New Value box
to determine the egress queue of the matching packets as follows:
If the new value (0..7) is a CoS/802.1p priority, use the priority value and
the CoS/802.1p to Queue Table to determine the egress queue of all the
matching packets.
If the new value (0..63) is a DSCP, use the new DSCP and the DSCP to
Queue Table to determine the egress queue of the matching IP packets.
Otherwise, use the new value (1..8) as the egress queue number for all the
matching packets.
•
Traffic Redirect
—Select whether to redirect matching traffic. If so, select
the unit/port to which traffic will be redirected.
•
Redirect Target
—Select the unit/port to which traffic will be redirected.
•
Police Type
—Select the policer type for the policy. The options are:
-
None
—No policy is used.
-
Single
—The policer for the policy is a single policer.
-
Aggregate
—The policer for the policy is an aggregate policer.
STEP 5
If
Police Type
is
Aggregate
, select the Aggregate Policer.
STEP 6
If
Police Type
is
Single
, enter the following QoS parameters:
