Cisco 350XG series, Руководство администратора

Страница: 503 / 625

Security: SSH Server
Common Tasks
Cisco 350XG & 550XG Series 10G Stackable Managed Switches 484
22
Common Tasks
This section describes some common tasks performed using the SSH Server
feature.
Workflow1: Create an SSH session with no SSH user authentication,
perform the following:
STEP 1
Enable SSH server in the TCP/UDP Services page.
STEP 2
Disable SSH user authentication by password and by public key in the SSH User
Authentication page.
STEP 3
Establish SSH sessions to the device from a SSH client application such as
PUTTY.
Workflow2: To create an SSH session with SSH user authentication by
password, perform the following steps:
STEP 1
Enable SSH server in the TCP/UDP Services page.
STEP 2
Enable SSH User authentication by password in the SSH User Authentication
page.
STEP 3
Establish SSH sessions to the device from a SSH client application such as
PUTTY.
Workflow3: Create an SSH session with SSH user authentication by
public key with/without bypassing management authentication, perform
the following steps:
STEP 1
Enable SSH server in the TCP/UDP Services page.
STEP 2
Enable SSH User authentication by public key in the SSH User Authentication
page. The public key must have already been created at the SSH client and will
be used by the SSH client to establish a SSH session to the SSH server on the
device.
STEP 3
Enable Automatic Login by passing management authentication if required in the
SSH User Authentication page.
STEP 4
Add the users and their public key into to SSH User Authentication Table in the
SSH User Authentication page.