manualshive.com logo in svg

Cisco 350XG series, Руководство администратора

Поделиться
Скачать
Cisco 350XG series Скачать руководство пользователя страница 216

Smartport

Configuring Smartport Using The Web-based Interface

Cisco 350XG & 550XG Series 10G Stackable Managed Switches

207

11

 

•

Macro Type—Select whether the pair of macro and anti-macro associated 
with this Smartport type is built-in or user-defined.

•

User Defined Macro—If desired, select the user-defined macro that is to be 
associated with the selected Smartport type.   The macro must have already 
been paired with an anti-macro. 

Pairing of the two macros is done by name and is described in the Smartport 
Macro section.

•

Macro Parameters—Displays the following fields for three parameters in the 
macro:

-

Parameter Name

—Name of parameter in macro.

-

Parameter Value

—Current value of parameter in macro. This can be 

changed here.

-

Parameter Description

—Description of parameter.

You can restore the default parameter values by clicking Restore Defaults.

STEP  5

Click 

Apply 

to save the changes to the running configuration. If the Smartport 

macro and/or its parameter values associated with the Smartport type are 
modified, Auto Smartport automatically reapplies the macro to the interfaces 
currently assigned with the Smartport type by Auto Smartport.   Auto Smartport 
does not apply the changes to interfaces that were statically assigned a 
Smartport type.

NOTE

There is no method to validate macro parameters because they do not have a type 
association. Therefore, any entry is valid at this point. However, invalid parameter 
values may cause errors to occur when the Smartport type is assigned to an 
interface, applying the associated macro.

Interface Settings

Use the Interface Settings page to perform the following tasks:

•

Statically apply a specific Smartport type to an interface with interface-
specific values for the macro parameters.

•

Enable Auto Smartport on an interface.

•

Diagnose a Smartport macro that failed upon application, and caused the 
Smartport type to become Unknown. 

Содержание 350XG series


















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды