Administration: Stack Management
Stack Topology
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
104
7
Stack in Ring Topology (550 family)
A ring topology is more reliable than a chain topology. The failure of one link in a
ring does not affect the function of the stack, whereas the failure of one link in a
chain connection might cause the stack to be split.
Topology Discovery
A stack is established by a process called topology discovery. This process is
triggered by a change in the up/down status of a stack port.
The following are examples of events that trigger this process:
•
Changing the stack topology from a ring to a chain
•
Merging two stacks into a single stack
•
Splitting the stack
•
Inserting other slave units to the stack, for instance because the units were
previously disconnected from the stack due to a failure. This can happen in
a chain topology if a unit in the middle of the stack fails.
During topology discovery, each unit in a stack exchanges packets, which contain
topology information.
After the topology discovery process is completed, each unit contains the stack
mapping information of all units in the stack.
