Security
Configuring RADIUS
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
398
19
•
Timeout for Reply
—Select
User Defined
and enter the number of seconds
the device waits for an answer from the RADIUS server before retrying the
query, or switching to the next server if the maximum number of retries were
made. If Use Default is selected, the device uses the default timeout value.
•
Authentication Port
—Enter the UDP port number of the RADIUS server port
for authentication requests.
•
Accounting Port
—Enter the UDP port number of the RADIUS server port for
accounting requests.
•
Retries
—Select
User Defined
and enter the number of requests that are
sent to the RADIUS server before a failure is considered to have occurred. If
Use Default is selected, the device uses the default value for the number of
retries.
•
Dead Time
—Select
User Defined
and enter the number of minutes that
must pass before a non-responsive RADIUS server is bypassed for service
requests. If Use Default is selected, the device uses the default value for the
dead time. If you enter 0 minutes, there is no dead time.
•
Usage Type
—Enter the RADIUS server authentication type. The options are:
-
Login
—RADIUS server is used for authenticating users that ask to
administer the device.
-
802.1X
—RADIUS server is used for 802.1x authentication.
-
All
—RADIUS server is used for authenticating user that ask to administer
the device and for 802.1X authentication.
STEP 6
Click
Apply
. The RADIUS server definition is added to the Running Configuration
file of the device.
STEP 7
To display sensitive data in plaintext form on the page, click
Display Sensitive
Data As Plaintext
.
