Security
TCP/UDP Services
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
414
19
To configure TCP/UDP services:
STEP 1
Click
Security
>
TCP/UDP Services
.
STEP 2
Enable or disable the following TCP/UDP services on the displayed services.
•
HTTP Service—Indicates whether the HTTP service is enabled or disabled.
•
HTTPS Service—Indicates whether the HTTPS service is enabled or
disabled.
•
SNMP Service—Indicates whether the SNMP service is enabled or
disabled.
•
Telnet Service—Indicates whether the Telnet service is enabled or disabled.
•
SSH Service—Indicates whether the SSH server service is enabled or
disabled.
STEP 3
Click
Apply
. The services are written to the Running Configuration file.
The TCP Service Table displays the following fields for each service:
•
Service Name
—Access method through which the device is offering the
TCP service.
•
Type
—IP protocol the service uses.
•
Local IP Address
—Local IP address through which the device is offering
the service.
•
Local Port
—Local TCP port through which the device is offering the service.
•
Remote IP Address
—IP address of the remote device that is requesting the
service.
•
Remote Port
—TCP port of the remote device that is requesting the service.
•
State
—Status of the service.
The UDP Service table displays the following information:
•
Service Name
—Access method through which the device is offering the
UDP service.
•
Type
—IP protocol the service uses.
•
Local IP Address
—Local IP address through which the device is offering
the service.
