Cisco 350XG series, Руководство администратора

Страница: 549 / 625

Security: IPv6 First Hop Security
Configuring IPv6 First Hop Security through Web GUI
Cisco 350XG & 550XG Series 10G Stackable Managed Switches 530
24
Policy Attachment (Port)
To attach a policy to one or more ports or LAGs:
STEP 1
Click Security > IPv6 First Hop Security > Policy Attachment (Port) .
The list of policies that are already attached are displayed along with their
Interface number, Policy Type , Policy Name and VLAN List .
STEP 2
To attach a policy to a port or LAG, click Add and enter the following fields:
• Interface —Select the interface on which the policy will be attached.
• Policy Type —Select the policy type to attach to the interface. IPv6 First
Hop Security Overview .
• Policy Name —Select the name of the policy to attach to the interface
• VLAN List —Select the VLANs to which the policy is attached. Select All
VLANs or enter a range of VLANs.
STEP 3
Click Apply to add the settings to the Running Configuration file.
Neighbor Binding Table
To view entries in the Neighbor Binding table:
STEP 1
Click Security > IPv6 First Hop Security > Neighbor Binding Table
STEP 2
Select one of the following clear table options:
• Static Only —Clear all static entries in the table.
• Dynamic Only —Clear all dynamic entries in the table.
• All Dynamic & Static —Clear all dynamic and static entries in the table.
The following fields are displayed for each policy (only fields not on Add page are
displayed:
• Origin —Protocol that added the IPv6 address (only available for dynamic
entries):
- Static —Added manually.
- NDP —Learnt from Neighbor Discovery Protocol messages.